Product Details

Product Code
Stok Yes



Explanation

Conventional vibrating screen is manufactured to separate the material in different sizes. They are produced as 1, 2, 3, 4 layers.

They are activated by a separate engine, pole or belt- frame system special bearings with an eccentric bearing bedded in the screen body with special bearings, and two eccentric weights on both ends of the bearing. They display CYCLIC vibration.

Vibrating body heavy duty type is placed on the main frame through enough number of spiral springs.

The space between screen layers is wide enough to enable screen wire replacement.
Wire strainer system is projected in such a way to enable wire replacement in the best possible time. 

In screen activation system heavy duty type moving bobbin bearings are used. These bearings are specially manufactured for heavy loads. Screen front joint can be railed when necessary and thus quick replacement of the screen wire is provided. Three-sided platform in the screen frame enables easy maintenance opportunity.
TİP ANMA ÖLÇÜLERİ MOTOR GÜCÜ AĞIRLIK / WEIGHT
TYPE NOMINAL DIMENSIONS MOTOR POWER TEK KATLI
SINGLE DECK
2 KATLI
2 DECK
3 KATLI
3 DECK
4 KATLI
4 DECK
  mm kw/rpm kg kg kg kg
ST10-30 1000x3000 5,5/1500 2000 2300 2735 3200
ST12-30 1200x3000 55/1500   2415 2965 3415
ST12-35 1200x3500 7,5/1500 - 3030 3315 3735
ST12-40 12000x4000 7,5/1500 - 4750 5050 5450
ST15-40 15000x4000 11/1500 - 5700 6500 6900
ST16-50 1600x5000 15/1500 - 6550 7900 8200
ST20-50 2000x5000 22/1500 - 8550 8850 11500
ST20-60 2000x6000 30/1500 - - 10620 12890
ST24-60 2400x6000 37/1500 - - 14405 15468
ST24-70 2400x7000 45/1500 - - 17000 19000

These screen vibrate elliptically. Direction of the ellipse is from back to the front and front of the screen is backwards. Material speed on the back of the screen is faster than the front part. Accordingly sifting efficiency is higher in upper side activated screen.
Group on which the activation part attached is mounted on the main screen body through the nuts. Short bearings on which eccentric weights attached are mounted to each other through cardan shaft. There are 2 special screen bearings in each bedding group. There are 2 bedding groups in screen smaller than 14 m2 and 4 bedding groups in bigger screen (2 cardan shaft).








Tags: Conventional Vibrating Screens



This product 175 was examined times.

Comments